EBL_Upload

TheEric · 2009-02-11 16:09:29

is a generic flash error that something went wrong. Most commonly it’s a Filesize error. Check what the server allows for max filesize for both apache/IIS and PHP. If the server is set for a smaller fiesize than what you’re uploading, then that would generally trigger that error. It ~~can~~ be overridden with an htaccess file, but that depends on the host.

Put the following in the htaccess file and see if this fixes the problem.

php_value upload_max_filesize 20M
php_value post_max_size 20M

jstubbs · 2009-02-11 18:26:39

Umm. Not sure why this should be a problem, since on Joyent those variables are set to 32M – in the php.ini file.

Since this has been reported by a client, I have to check what they actually did. Will report back.

masa · 2009-02-11 18:59:07

jstubbs wrote:

Since this has been reported by a client, I have to check what they actually did. Will report back.

This happened to me the other day and then I remembered, that Joynet (Textdrive) has mod_security enabled. As per Eric’s earlier instructions you need to add these lines to your .htaccess file:

<IfModule mod_security.c>
	SecFilterEngine Off
	SecFilterScanPOST Off
</IfModule>

jstubbs · 2009-02-11 20:12:06

Hi Martin, pretty sure its not that, because I have uploaded many times on this domain myself without any issues, and on other Joyent hosted domains too. I don’t have secFilterEngine in any .htaccess file, and I have never had any problems.

masa · 2009-02-11 20:39:31

jstubbs wrote:

I don’t have secFilterEngine in any .htaccess file, and I have never had any problems.

Funny, mine wouldn’t work until I added those lines. Yes, sounds like it’s something else in your case.

jstubbs · 2009-02-12 20:31:55

Eric, just realised I posted in the old ebl_upload forum thread instead of the EBL Upload 3 thread. Sorry about that. Since I already mentioned an error, I will follow up here.

The size of the image was 44kb, so memory limits (already 32m in php.ini) should not be the problem. Any other ideas?

mrjysta · 2009-03-06 12:23:09

Hi guys, I seem to be having problems with the image re-sizing part of this plug-in. I need to constrain the width of all my images to 330px with various different heights. If I set the height to 0 or leave it blank the image distorts badly. How can I get around this problem?

Thanks/

TheEric · 2009-03-07 05:49:08

It shouldn’t distort the image as resizing is determined by the longest side. Have you edited the plug-in at all?

note : I just double checked with an install I have here, and it didn’t distort at all with the dimensions you entered. I checked a couple of different images and both were the same.

Last edited by TheEric (2009-03-07 05:51:55)

mrjysta · 2009-03-08 13:33:52

Hi eric, I tried it again and it worked with some of the images fine, with others I still got the distortion. I havn’t changed the plug-in at all. Maybe because the image was very large/ or higher then 72 dpi??? I’ll see if there is a pattern to the images that didn’t work/

TheEric · 2009-03-08 20:08:20

I’de like to know too, because I specifically added a chunk of code so that it wouldn’t distort the images under any circumstance.

mrjysta · 2009-03-09 10:03:42

Hi Eric,

here is an example of the problem I have been having with some of the images.

regards/

TheEric · 2009-03-09 13:34:35

Can you email me a copy of the image used, and a logon to the site in question?

Textpattern CMS

Textpattern CMS support forum

#133 2009-02-11 16:09:29

Re: EBL_Upload

#134 2009-02-11 18:26:39

Re: EBL_Upload

#135 2009-02-11 18:59:07

Re: EBL_Upload

#136 2009-02-11 20:12:06

Re: EBL_Upload

#137 2009-02-11 20:39:31

Re: EBL_Upload

#138 2009-02-12 20:31:55

Re: EBL_Upload

#139 2009-03-06 12:23:09

Re: EBL_Upload

#140 2009-03-07 05:49:08

Re: EBL_Upload

#141 2009-03-08 13:33:52

Re: EBL_Upload

#142 2009-03-08 20:08:20

Re: EBL_Upload

#143 2009-03-09 10:03:42

Re: EBL_Upload

#144 2009-03-09 13:34:35

Re: EBL_Upload

Board footer