Textpattern CMS support forum
You are not logged in. Register | Login | Help
- Topics: Active | Unanswered
Re: hak_article_image
The tags need to be used in the article form, since it requires an article to pull the article image from.
Shoving is the answer – pusher robot
Offline
#14 2005-09-10 15:21:54
- ickii
- New Member
- Registered: 2005-09-08
- Posts: 5
Re: hak_article_image
This is what I have in the aritcle form
I guess I can’t post the actual form code but it’s basically the default article form with the txp:hak_article_thumb code added after the end of h3
Is this incorrect?
Ickii
Last edited by ickii (2005-09-10 15:25:11)
Offline
Re: hak_article_image
That sounds fine. It looks like the error is happening in the textpattern wrapping function. Are you passing anything through as a wraptag or a breaktag?
Shoving is the answer – pusher robot
Offline
#16 2005-09-10 16:34:19
- ickii
- New Member
- Registered: 2005-09-08
- Posts: 5
Re: hak_article_image
I don’t think so, the aritcle is only one paragraph. Im new to txp and just adding test articles to try to figure some of this out. So really all I’ve done is…
uploaded hak_article_image plugin
added the hak_article_image tag to the default article form
wrote a new article, added the article image in the advanced options
wrote a short paragraph in the text field
set a catagory and section
published
Any ideas? Thanks for the help btw.
ickii
Offline
Re: hak_article_image
I think I might have figured it out. In the article image field are you entering an id or a file path (like 6.jpg)?
Shoving is the answer – pusher robot
Offline
Re: hak_article_image
I uploaded version 0.3.2 which I think should take care of the problem you are seeing. Let me know if it does.
Shoving is the answer – pusher robot
Offline
#19 2005-09-11 00:22:44
- ickii
- New Member
- Registered: 2005-09-08
- Posts: 5
Re: hak_article_image
Sorry for the delay in responding, other obligations and all.
I updated to 0.3.2 and now the error message is gone but still no image appears in the article.
I have txp:image id=“2” as the article image. With <> of course.
And still txp:hak_article_image placed in the article form.
Now instead of an image there is “ alt=”“ /> appearing in the article. Could it be where I’m placing the hak_article_image tag in the form?
I appreciate your efforts. :)
ickii
Offline
Re: hak_article_image
Did you write <txp:image id="2" /> in the “article image” field? If you did so, maybe you wanna try to write just 2… got confused the first time I used that too ;)
Last edited by zoeglingjulian (2005-09-11 01:13:40)
Offline
#21 2005-09-11 01:56:28
- ickii
- New Member
- Registered: 2005-09-08
- Posts: 5
Re: hak_article_image
hmmm and to think I tried everything else. LOL
That was it, it’s a bit confusing when everything looks like your supposed to add all the other stuff.
Thanks zoeglingjulian and hakjoon for the assistance.
ickii
Offline
Re: hak_article_image
Sorry I didn’t get back yesterday, but it looks like you figured things out. The fix wouldn’t have taken care of your situation but it helped me find a scenario that should work and wasn’t though so that was good.
Glad you got it working. I’ll see about updating the help to reflect better how it should be used.
Last edited by hakjoon (2005-09-11 23:06:41)
Shoving is the answer – pusher robot
Offline
Re: hak_article_image
Mmmmm this is absolutely perfect. Nice one! Got it running on my beta site :¬)
Offline
#24 2005-11-01 12:51:05
- eyesolation
- New Member
- Registered: 2005-10-18
- Posts: 4
Re: hak_article_image
very nice plugin! found a minor bug though when using offset and limit parameters at the same time in v0.3.2.
removing the optional “$limit + 1” parameter on the split function in line 17 fixes the bug.
Offline