[plugin] [ORPHAN] glx_if: some conditional tags

alicson · 2005-04-23 17:29:17

*bump* ?

osei · 2005-04-24 13:17:25

Sorry alicson, i missed your other post, not very easy to keep up to date when the forum is all wacky…

hmm, im using <code><txp:glx_if_comments_count operator=“greater_than” value=“0”> </code> and <code><txp:glx_if_comments_count operator=“equal_to” value=“0”></code> on my own page and they seem to work okey there.

But i will do some test and see if i can figure out if there are anything strange going on.

danielk · 2005-05-01 22:29:16

I’m using rc3.253, and I seem to be running into an issue with if_section_not_frontpage. I’d like to have a selection of images on the frontpage of section ‘gallery’, and display the section specific images everywhere else. if_section_frontpage worked fine, got some output, and it went away when I navigated to a different sub-section of the gallery. However, nothing showed up on the subpages when the frontpage specific code went away.

I tried if_section_not_frontpage & if_not_section_frontpage, and got nothing on either. I misspelled a closing tag on purpose and got :

Warning: Missing argument 2 for glx_if_not_section_frontpage() in /home/mysite/public_html/quality/textpattern/lib/txplib_misc.php(304) : eval()’d code on line 1026

so I know it’s doing something. I’m using this code:

<code>

<txp:glx_if_section_frontpage>
<txp:rss_thumbpop showcaption=“0” jpop=“0” showpagelinks=

Last edited by danielk (2005-05-01 22:30:40)

osei · 2005-05-02 05:20:58

It should be glx_if_not_section_frontpage

i havent tested glx_if_not_section_frontpage yet on rc3, but im planning on returning trhough the evalElse function instead.

you could try to comment out or delete the function glx_if_section_frontpage (if you click on the edit link you find the source) and replace the below code.
<code>
function glx_if_section_frontpage($atts, $thing)
{ global $pretext, $is_article_list; $condition = (empty($pretext[“c”]) && $is_article_list == true) ? true : false; return parse(EvalElse($thing, $condition));
}
</code>

Then you will be able to use it like this instead
<code>
<txp:glx_if_section_frontpage>
<txp:rss_thumbpop showcaption=“0” jpop=“0” showpagelinks=

danielk · 2005-05-02 18:36:59

Works like a champ! Thanks!

Does exactly what it says, this will be darn handy.

tinyfly · 2005-05-31 13:54:58

the evalElse fuction for if_section_frontpage works great, thanks

Anark · 2005-06-01 04:14:32

Could you add if_preview?

Here’s a problem it might solve.

andreaparrish · 2005-07-30 18:59:58

is the link down for good or is this temporary?

osei · 2005-07-30 21:23:27

There has been a power failure where my server is located, and right now i cant find any person with a key to go down and restart her, but i really hope this problem will be solved soon, and yes iam about to move to a new server that is located in a (much) safer place.

osei · 2005-07-31 19:41:18

Thanks Stuart, im up and running on a new server now and i hope this will work much better.

thebombsite · 2005-07-31 20:06:35

OK no problem. I’ll delete my post so people don’t get confused. There’s been 5 downloads if you want to adjust your count.

xmerokox · 2005-08-10 22:23:13

Hi, I’m pretty new to this and so I’m not very good with txp yet. But I have a question. Does this plugin work with RC5? When I view the page, I either get no content or the code is shown instead (the code used inside of the plugin conditional tags).

thebombsite · 2005-08-10 22:28:58

First off have you switched the plug-in on? If you have then more info is required. Can you post the code you are using. Place it inside < code>< /code> tags (without the spaces).

xmerokox · 2005-08-11 19:29:19

Plug-in is turned on =) Here is what I used:

<code><txp:glx_if_frontpage> FRONT PAGE. </txp:glx_if_frontpage> <txp:glx_if_not_section_frontpage> NOT SECTION FRONTPAGE. </txp:glx_if_not_section_frontpage> <txp:glx_if_section_frontpage> SECTION FRONTPAGE. </txp:glx_if_section_frontpage></code>

On my front page and section front page, what was supposed to show did show and what wasn’t supposed to show didn’t (so that works fine). However, on the frontpage, section frontpage, and section page this always displayed:

<code><txp:glx_if_not_section_frontpage> NOT SECTION FRONTPAGE. </txp:glx_if_not_section_frontpage></code>

And also, on my frontpage this also showed:

<code>SECTION FRONTPAGE.</code>

I even placed the if_section_not_frontpage tag above the if_section_frontpage like stated in the help file, but that above still showed on my pages.

thebombsite · 2005-08-11 19:45:18

Is this a recent download of the plug-in because it now uses “evalElse” which means that the correct usage of if_section_frontpage would be something like:-

Textpattern CMS

Textpattern CMS support forum

#61 2005-04-23 17:29:17

Re: [plugin] [ORPHAN] glx_if: some conditional tags

#62 2005-04-24 13:17:25

Re: [plugin] [ORPHAN] glx_if: some conditional tags

#63 2005-05-01 22:29:16

Re: [plugin] [ORPHAN] glx_if: some conditional tags

#64 2005-05-02 05:20:58

Re: [plugin] [ORPHAN] glx_if: some conditional tags

#65 2005-05-02 18:36:59

Re: [plugin] [ORPHAN] glx_if: some conditional tags

#66 2005-05-31 13:54:58

Re: [plugin] [ORPHAN] glx_if: some conditional tags

#67 2005-06-01 04:14:32

Re: [plugin] [ORPHAN] glx_if: some conditional tags

#68 2005-07-30 18:59:58

Re: [plugin] [ORPHAN] glx_if: some conditional tags

#69 2005-07-30 21:23:27

Re: [plugin] [ORPHAN] glx_if: some conditional tags

#70 2005-07-31 19:41:18

Re: [plugin] [ORPHAN] glx_if: some conditional tags

#71 2005-07-31 20:06:35

Re: [plugin] [ORPHAN] glx_if: some conditional tags

#72 2005-08-10 22:23:13

Re: [plugin] [ORPHAN] glx_if: some conditional tags

#73 2005-08-10 22:28:58

Re: [plugin] [ORPHAN] glx_if: some conditional tags

#74 2005-08-11 19:29:19

Re: [plugin] [ORPHAN] glx_if: some conditional tags

#75 2005-08-11 19:45:18

Re: [plugin] [ORPHAN] glx_if: some conditional tags

Board footer