Textpattern CMS support forum
You are not logged in. Register | Login | Help
- Topics: Active | Unanswered
#13 2018-03-08 09:32:04
- Algaris
- Member
- From: England
- Registered: 2006-01-27
- Posts: 548
Re: https barrier to local dev testing on Safari
I used to use VirtualHostX before I started dabbling with Raspberry Pi Linux servers.
After reading this thread and the linked articles it looks like I’ll need to change the virtual hosts I use for development work.
Last edited by Algaris (2018-03-08 09:34:52)
Offline
Re: https barrier to local dev testing on Safari
P.S. With my MampPro on localhost all my test sites use: .dev with no issues under Safari or Firefox…
…. texted postive
Online
Re: https barrier to local dev testing on Safari
bici wrote #309773:
P.S. With my MampPro on localhost all my test sites use: .dev with no issues under Safari or Firefox…
That sort of makes sense, hosts overrides the usual DNS resolution, if I remember correctly.
Offline
Re: https barrier to local dev testing on Safari
bici wrote #309773:
P.S. With my MampPro on localhost all my test sites use: .dev with no issues under Safari or Firefox…
That’s what I thought too, but it stopped working for me a while ago and I’ve had to change them since…
TXP Builders – finely-crafted code, design and txp
Offline
Re: https barrier to local dev testing on Safari
RFC2606 is your buddy here: tools.ietf.org/html/rfc2606#page-2
To safely satisfy these needs, four domain names are reserved as
listed and described below.
.test
.example
.invalid
.localhost
".test" is recommended for use in testing of current or new DNS
related code.
".example" is recommended for use in documentation or as examples.
".invalid" is intended for use in online construction of domain
names that are sure to be invalid and which it is obvious at a
glance are invalid.
The ".localhost" TLD has traditionally been statically defined in
host DNS implementations as having an A record pointing to the
loop back IP address and is reserved for such use. Any other use
would conflict with widely deployed code which assumes this use.Offline
Re: https barrier to local dev testing on Safari
bici wrote #309773:
P.S. With my MampPro on localhost all my test sites use: .dev with no issues under Safari or Firefox…
Hmm which OS are you running? On my old iMac, running macOS 10.11 + Safari 11 + Firefox 58, that worked, yes. It didn’t work anymore with Opera beta from late November (and the latest nightly from Firefox somewhere end of December). But on my new iMac, running macOS 10.13, that fails with Safari 11 + Opera release build (still works with Firefox 58 but not later). For Safari, that is because the macOS libraries have been updated. I never got to test that on macOS 10.12.
I switched all my local domains to use .local now.
gaekwad wrote #309774:
That sort of makes sense,
hostsoverrides the usual DNS resolution, if I remember correctly.
Nope. .dev seems to be hardcoded deep down to resolve to https (that is what I understand from the few articles posted upthread).
Where is that emoji for a solar powered submarine when you need it ?
Sand space – admin theme for Textpattern
Offline
Re: https barrier to local dev testing on Safari
phiw13 wrote #309785:
Nope.
.devseems to be hardcoded deep down to resolve tohttps(that is what I understand from the few articles posted upthread).
Then perhaps I’m doing something wrong, cos my hosts bypasses the usual DNS resolution (I’m using Google Public DNS at my router)…
hosts here includes this line (temporarily, I’m not stalking you):
127.0.0.1 phiw13.devName resolution works fine:
$ ping phiw13.dev
PING phiw13.dev (127.0.0.1): 56 data bytes
64 bytes from 127.0.0.1: icmp_seq=0 ttl=64 time=0.032 ms
64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.035 ms
64 bytes from 127.0.0.1: icmp_seq=2 ttl=64 time=0.020 ms
64 bytes from 127.0.0.1: icmp_seq=3 ttl=64 time=0.023 ms
64 bytes from 127.0.0.1: icmp_seq=4 ttl=64 time=0.033 ms
64 bytes from 127.0.0.1: icmp_seq=5 ttl=64 time=0.032 ms
64 bytes from 127.0.0.1: icmp_seq=6 ttl=64 time=0.019 ms
^C
--- phiw13.dev ping statistics ---
7 packets transmitted, 7 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.019/0.028/0.035/0.006 msIf I switch that hosts entry to a LAN IP that I know runs a web server:
$ ping phiw13.dev
PING phiw13.dev (10.1.1.67): 56 data bytes
64 bytes from 10.1.1.67: icmp_seq=0 ttl=64 time=0.896 ms
64 bytes from 10.1.1.67: icmp_seq=1 ttl=64 time=0.429 ms
64 bytes from 10.1.1.67: icmp_seq=2 ttl=64 time=0.398 ms
64 bytes from 10.1.1.67: icmp_seq=3 ttl=64 time=0.379 ms
64 bytes from 10.1.1.67: icmp_seq=4 ttl=64 time=0.374 ms
^C
--- phiw13.dev ping statistics ---
5 packets transmitted, 5 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.374/0.495/0.896/0.201 ms…and I’ll curl that new IP’s index page:
$ curl -O http://phiw13.dev/index.html
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 169 100 169 0 0 10476 0 --:--:-- --:--:-- --:--:-- 10562…which looks like this:
$ cat ./index.html
<html>
<head><title>404 Not Found</title></head>
<body bgcolor="white">
<center><h1>404 Not Found</h1></center>
<hr><center>nginx/1.10.3</center>
</body>
</html>traceroute checks out fine, one hop:
$ traceroute phiw13.dev
traceroute to phiw13.dev (10.1.1.67), 64 hops max, 52 byte packets
1 polaris (10.1.1.67) 0.612 ms 0.337 ms 0.383 msPerhaps I should have said my local hosts overrides internet DNS resolution. I’m not doing anything special, as far as I know.
Offline
Re: https barrier to local dev testing on Safari
gaekwad wrote #309789:
Then perhaps I’m doing something wrong, cos my
hostsbypasses the usual DNS resolution (I’m using Google Public DNS at my router)…
But can you access that domain with a web browser?
I have (had actually) exactly that domain in my host file (and set up in my vhost.conf). ping and friends did work; but browsers? no nothing but that friendly message.
Where is that emoji for a solar powered submarine when you need it ?
Sand space – admin theme for Textpattern
Offline
Re: https barrier to local dev testing on Safari
phiw13 wrote #309792:
I have (had actually) exactly that domain in my host file (and set up in my vhost.conf). ping and friends did work; but browsers? no nothing but that friendly message.
In Safari 11, yep – it resolves to the local IP, no enforced SSL, shows me the Nginx homepage.
In Chrome 64, nope. In Firefox mainline and dev 59, nope. Tor, nope. I just discovered this since I wondered if it was browser-specific.
Offline
Re: https barrier to local dev testing on Safari
gaekwad wrote #309795:
In Safari 11, yep – it resolves to the local IP, no enforced SSL, shows me the Nginx homepage.
on macOS 10.13.3? It fails with Safari here. As I said it works on 10.11 (and I don’t know about 10.12).
Where is that emoji for a solar powered submarine when you need it ?
Sand space – admin theme for Textpattern
Offline
Re: https barrier to local dev testing on Safari
phiw13 wrote #309797:
on macOS 10.13.3? It fails with Safari here. As I said it works on 10.11 (and I don’t know about 10.12).
It works on 10.12.6, that’s what I’m running here.
Offline
Re: https barrier to local dev testing on Safari
for me: Safari Version 11.0.3 / MacOS Sierra 10.12.6
…. texted postive
Online