Plug-in: zem_contact_reborn

marios · 2006-04-01 14:31:15

Stu, are you still up and running ?

regards, marios

marios · 2006-04-01 14:34:10

Ok, I tell you what,
I ‘m going to start from the default fallback template, and build up attribute by attribute,
May be that brings us a little further after allmost 500 posts on this topic.

regards, marios

thebombsite · 2006-04-01 15:03:32

Sorry marios. I was going back through the thread to see what we were still missing. I’ve mentioned your problem to Tranquillo so hopefully he can spot something that may be wrong. From my point-of-view, other than that “from” attribute problem, I can’t see anything wrong with your form, indeed it is extremely similar to the one I test with isn’t it, so I’m a bit stumped. :(

marios · 2006-04-01 15:46:08

First test run with self enclosed default tag:

Results, starting from using just default self enclosing tag,

<h2>Attributes tested</h2>

Nr	Attributes	results	remarks
1.	subject=“any”	passed	–
2.	copysender=“yes”	passed	Feature request: It would be nice, if you could custumize the copy sender e-mail body that get’s returned with a form.E.g.: Your request has been quewed at speedy.com,we will act very quickly, You received this e-mail because,bla bla
3.	form=“custom”	passed together with options 1. and 2. above	using output form with default form elements
4.	from=“humphrey@borgard.com”	passed with options 1.,2.,3.	still same form elements
5.	from_form=”?”	not tested	I still don’t understand the use of that one
6.	Label=“any”	works	-
7.	redirect=“testpage”	passed	-
8.	send_article	I skip that for now	-
9.	thanks_form	passed	-
10.	to_form	passed	allthough again I don’t understand the use for this one
11.	show_input & show_error	skip for now	I assume that can be used only on a page template, but does it work within an output form? Please confirm.

<hr />

<h2>Adding more tags to contact form</h2>

12.	added <code> <txp:zem_contact_text /></code> with attr. label	fails	<del>no e-mails get sent out,</del> no error report message in this case, because I deleted the default values from array variables , EDIT.:strange, e-mail gets processed only for copysender but not for recipient,I think, this has been reported before as well,
13.	same as above but with textarea	fails	-
14.	same as above but copysender removed att removed	fails	no e-mail gets out
15.	same as above, but this time with required=“yes” for all input fields except e-mail	fails	e-mail gets sent out, but instead of recipient, copysender receives,allthough the copysender attribute is still omitted .
16.	Same as above, but this time with copysender attribute set to no	fails	e-mail goes to copysender instead
17.	Same as above but removed to-form	passes	it seems as if the plugin uses the to form
18.	added drop down list	passed	-

Last edited by marios (2006-04-01 20:40:36)

tranquillo · 2006-04-01 18:39:03

@marios:

The name attribute of the textarea called “play data” has a white space. Replace it with an underscore.

Doing that, the form works perfectly for me.

Please, note, that the zem_contact_text with the label “Subject” is not used as the subject of the email. You have to set the subject in the zem_contact tag.

Last edited by tranquillo (2006-04-01 18:44:47)

marios · 2006-04-01 18:55:39

So far understood, allso verified above and works, but it seems as for now that adding any additional text input tag to the contact form, will stop the plugin from mailing to recipient, just copysender e-mail only is received.See above test results, Im still trying some more combinations and attributes to definitely verify this.
@tranquillo,
Is there any way, how we could implement an e-mail template form, like it has in mem_self_register?
that would be much more convenient to sort out the submission info on receival.

regards, marios

Last edited by marios (2006-04-01 19:05:53)

joel · 2006-04-07 05:27:44

I have a problem discussed in this thread

When I used this code, no value showed up in the message.

<txp:zem_contact_radio name="forstahandsval" label="Tvärflåt" />, från 10 år

Is seems like it’s not possible to have foreign-characters in the label of a radio-button. I need both the form-output and the mail-content to make sense which demands the use of “åäö-characters.”

See the site in action here

Last edited by joel (2006-04-07 05:29:28)

fpradignac · 2006-04-20 06:19:12

In the help of the zem_contact_lang plugin, you link to a thread of doggiez that would provide an example of a dual-language utilisation, but the link point to the begining of this thread and after reading this 19 pages … I’ve found nothing.

Where can we find this example please, cause I’m trying to use 2 languages ?

Last edited by fpradignac (2006-04-20 06:32:53)

marios · 2006-04-20 10:47:27

fpradignac wrote:

In the help of the zem_contact_lang plugin, you link to a thread of doggiez that would provide an example of a dual-language utilisation, but the link point to the begining of this thread and after reading this 19 pages … I’ve found nothing.

Where can we find this example please, cause I’m trying to use 2 languages ?

I’ve noticed that allso, and from what I remember, inside the 20 pages, there is a post from Doggiez(Els) that links to another post, where you find the dual language info, but of course, reading the 500 posts again would be a waste of time.(Best thing, drop her a forum mail)

regards

els · 2006-04-20 14:35:17

I already mailed François, but if anyone else wants it: here.

Last edited by els (2006-04-20 14:35:34)

puthupa · 2006-04-21 03:30:21

Apologies for posting this, but the search function has not been too helpful with my problem, which is getting the plugin to work at all. It is installed & activated, and the tag is simply <txp:zem_contact to=“info@inkwire.net”>.

The result? _“To” address is missing. _ is this common?

thank you.

**** 5 minutes later ****

about to go to sleep, figured i’d take one more look, closed the tag so it’s now <txp:zem_contact to=“info@inkwire.net” /> and VOILA. it works.

Last edited by puthupa (2006-04-21 03:42:27)

Textpattern CMS

Textpattern CMS support forum

#445 2006-04-01 14:31:15

Re: Plug-in: zem_contact_reborn

#446 2006-04-01 14:34:10

Re: Plug-in: zem_contact_reborn

#447 2006-04-01 15:03:32

Re: Plug-in: zem_contact_reborn

#448 2006-04-01 15:46:08

Re: Plug-in: zem_contact_reborn

#449 2006-04-01 18:39:03

Re: Plug-in: zem_contact_reborn

#450 2006-04-01 18:55:39

Re: Plug-in: zem_contact_reborn

#451 2006-04-07 05:27:44

Re: Plug-in: zem_contact_reborn

#452 2006-04-20 06:19:12

Re: Plug-in: zem_contact_reborn

#453 2006-04-20 10:47:27

Re: Plug-in: zem_contact_reborn

#454 2006-04-20 14:35:17

Re: Plug-in: zem_contact_reborn

#455 2006-04-21 03:30:21

Re: Plug-in: zem_contact_reborn

Board footer